|
|||
| The PC-400 Programmable Clock also provides control circuits, but without the secondary clock controls. Programming of MTC and PC series clocks is easily accomplished with a human engineered Control Panel. A four digit display and LED indicators guide the operator through each step. The MTC and PC series of clocks may also be programmed from a computer terminal, with the added capability of synchronizing the computer and PC time. For locations requiring absolute timing accuracy, MTC and PC series clocks may be synchronized with the National Bureau of Standards. With the addition of a modem, MTC and PC series Clocks may be monitored and programmed from a remote computer terminal. |
Features
- Simple, user friendly programming
- 1 day, 5 day, 7 day programming
- Single event or bulk memory erase
- 10 year rated battery backup
- Two, four, or six programmable circuits
- Output circuit status indicators
- 650 event program
- Duration programming for output circuits
- Program security access code
- Output circuit ON-OFF-AUTO switches
- Simple chronological program review
- Automatic leap year update
- Automatic daylight savings time correction
- On-Off programming for output circuits
- 12 or 24 hour time display format
- Manual secondary clock controls (MTC series)
- Automatic correction of Wired Synchronous secondary clocks (MTC series)
- 10 programmable holiday periods
- Synchronize with computer time (RS232)
- Program from computer terminal (RS232)
- Four selectable output circuit programs
- Automatic correction of Minute Impulse clocks (MTC series)
- National Bureau of Standards synchronization
- Relay kit for extra control functions
- Expanded memory (2666 events)
- Serial output for digital secondary clocks (RS485)